Hydraulic oil filter elements are widely used in the industrial field, mainly used to filter and block particles or rubber impurities from entering the hydraulic oil to ensure the cleanliness of the hydraulic system.
At present, many consumers are inquiring about how to use the hydraulic oil filter element. We will also introduce the consumer carefully before selling the product. But many customers still can’t install it, won’t use it, and lose its filtering effect. So, how to use the hydraulic oil filter element? Today, the engineer of the hydraulic oil filter element manufacturer will popularize the skills of using the hydraulic oil filter element.
During use, in order to eliminate system problems of hydraulic oil, it is necessary to monitor the cleanliness of hydraulic oil through oil detection before use. Only when the hydraulic oil reaches the standard cleanliness index can the filter element be used to achieve the ideal filtering use and management effect. When cleaning and replacing the hydraulic oil filter element is appropriate, different filter elements can be selected according to the filtration precision and the size of the filter particles. At present, there are four kinds of coarse filter, ordinary filter, precision filter and special filter. It can filter impurities above 100 microns, 10-100 microns, 5-10 microns and 1-5 microns.
When choosing a hydraulic filter element, pay attention to the following points:
1. To meet the filtering accuracy
2. It can have sufficient flow capacity for a long time
3. The filter element has sufficient strength and will not be damaged by hydraulic pressure.
4. The hydraulic oil filter element should have sufficient corrosion resistance and can work normally for a long time under the specified temperature conditions.
5. Replace or clean filter elements frequently
The hydraulic oil filter elements produced by Nova Filter are made of single-layer or multi-layer metal mesh. It is classified according to different conditions of use, for layers and wire mesh. Can withstand high pressure without burrs. The use of high-quality materials can effectively prolong its service life.
QS NO. | SY-2208 |
CROSS REFERENCE | 266-7796 |
DONALDSON | |
FLEETGUARD | HF35540 |
ENGINE | CAT 315D/312D/319D |
VEHICLE | CAT EXCAVATOR |
LARGEST OD | 120(MM) |
OVERALL HEIGHT | 385/376 (MM) |
INTRNAL DIAMETER | 82 (MM) |