(1) Suitable for the filtration of many kinds of dust in polishing, sand blasting and welding fumes , and powder dust collection.
(2) Spun bonded polyester with PTFE membrane, microspore Offers 99.99% filter efficiency.
(3) Wide pleat spacing and smooth, hydrophobic PTFE provides excellent particle release.
(4) Excellent resistance to chemical erosion.
(5) Electrical plate/stainless steel top and bottom, no rust Perforated zinc galvanized metal inner core allows good airflow.
1.Using imported high quality materials, high precision, high dust holding capacity, good permeability, stable performance.Special filter paper embossing technology, fold uniformly, vertically and smoothly, more folds, more filter area increases.
2.With pioneered net lock technology, no burr, no rust; with thick net,so hardness is stronger, can effectively protect filter paper from Injury, and with grid smaller net, can effectively prevent particles to enter inside.
3.Using high-quality sealing tape, strong and flexible, not hard or bad;using AB glue, epoxy glue double paste, sealing performance enhanced.
4.Use high quality environmental friendly PU materials and molding technology, to ensure good end-elasticity, can against high pressure, and high or low temperature, seal firmly.
1.Can you drive without an air filter?
Without a functional air filter, dirt and debris can easily enter the turbocharger, causing extreme damage. … Without an air filter in place, the engine may also be sucking dirt and debris in at the same time. This can cause damage to internal engine parts, such as valves, pistons and cylinder walls.
2.Is air filter same as oil filter?
Types of filters
The intake air filter cleans the air of dirt and debris as it enters the engine for the combustion process. … The oil filter removes dirt and other debris from the engine oil. The oil filter sits to the side and at the bottom of the engine. The fuel filter cleans the fuel used for the combustion process.
3.Why do I have to change my air filter so often?
You have leaky air ducts
Leaks in your air ducts introduce dust and dirt from areas like your attic. The more dirt a leaky duct system brings into your home, the more dirt your air filter accumulate
Our Main business
We mainly produce good quality filters instead of original ones.
Our leading products have various of AIR filter, CABIN filter, FUEL filter, OIL filter, HYDRAULIC filter, FUEL WATER SEPARATOR filter ect.
Generally speaking, the filter element of commercial vehicles is replaced every 10,000 kilometers and 16 months. Of course, the air filter maintenance cycle of different brands is not exactly the same. The specific cycle can be replaced according to the requirements of the automobile manufacturer and the development of its own use. Environment and other factors make a specific working time arrangement. For example, if the car is used in severe haze, it is best to replace it every 3 months.
Filtration requirements of heavy truck filter element for filter:
1. High precision filtration technology: filter out the larger particles.
2. High efficiency of filtration technology: reduce the number of particles in the filter.
3. Prevent the problem of early wear and tear of the engine work and prevent the damage of the air mass flowmeter.
4. Low differential pressure ensures the best air-fuel ratio and reduces filtration loss.
5. Commercial vehicle filter element has large filtering area, high ash capacity and long service life.
6. Small installation space and compact structure design.
7. High wet stiffness to prevent the air filter element from being deflated and causing the safety filter element to be broken down.
Commercial vehicle filter replacement steps
The first step is to open an engine compartment cover and confirm the position of the filter element of the heavy truck. The air filter is generally located on the left side of the engine compartment, that is, the space above the left front wheel. You can see a square plastic black box, and the filter element is installed in the in. Simply lift up two different metal clips and lift up the entire air filter cover.
In the second step, remove the air filter element and check for more dust. The end of the filter element can be tapped lightly or the dust on the filter element can be cleaned with compressed air from the inside out. Do not rinse the filter element with tap water. For example, to check the serious blockage of the Jiefang air filter, you need to replace the new filter.
The third step is to thoroughly clean the heavy-duty filter box after the air filter has been disposed of. There will be a lot of dust under the air filter, which is what causes the loss of engine power. The location of the filter, the Jiefang air filter is generally located on the left side of the engine compartment, that is, above the left front wheel. By seeing such a square plastic black box, the filter element is installed inside. Fix individual models of commercial vehicle filter elements with screws. At this time, you need to select a suitable screwdriver to unscrew the screws on the air filter.
QS NO. | SK-1050APU |
CROSS REFERENCE | AT300487 43904176 10330470 |
DONALDSON | P613334 |
FLEETGUARD | AF25962 |
ENGINE | Diere excavation 210/240/250/850 |
VEHICLE | LIEBHERR A914C/A924C/R906/R914C/R924C/R926 |
LARGEST OD | 225(MM) |
INTRNAL DIAMETER | 130(MM) |
OVERALL HEIGHT | 425(MM) |
QS NO. | SK-1050BPU |
CROSS REFERENCE | AT300488 10330469 |
DONALDSON | P613335 |
FLEETGUARD | AF25963 |
LARGEST OD | 181/122(MM) |
INTRNAL DIAMETER | 95(MM) |
OVERALL HEIGHT | 405(MM) |