Hydraulic oil filter elements are widely used in the industrial field, mainly used to filter and block particles or rubber impurities from entering the hydraulic oil to ensure the cleanliness of the hydraulic system.
Nowadays, many consumers are calling to inquire about the use of hydraulic oil filter elements. The manufacturer will have a detailed introduction to the installation and use of the product before selling the product. However, many customers still won’t install it, so it can’t be used normally, which will lose its filtering effect. Today, the senior engineer of the hydraulic oil filter element manufacturer will give you some popular science, how to use the hydraulic oil filter element and some precautions.
In order to eliminate the system use problem of hydraulic oil, when using the filter element, be sure to check the cleanliness of the filter element through the oil test before use. After all, only when the hydraulic oil reaches the standard cleanliness index, the use of its filter element will achieve the established filtering effect. There are currently 4 types on the market as follows: coarse filters, ordinary filters, precision filters and special filters. These types of products can adequately filter out different impurities between 100 microns, 10 to 100 microns, 5 to 10 microns and 1 to 5 microns or more.
When choosing a hydraulic filter element, also pay attention to the following points:
1. To meet the filtering accuracy;
2. It can have sufficient flow capacity for a long time;
3. The filter element needs to have sufficient strength so that it will not be damaged by hydraulic pressure;
4. The hydraulic oil filter element must also have sufficient corrosion resistance, and it needs to work normally for a long time under the established temperature extreme conditions;
5. Replace or clean filter elements frequently.
The hydraulic oil filter elements produced in our factory are made of single-layer or multi-layer metal mesh. The product can be distinguished according to different conditions of use. It is used in high pressure conditions that the wire mesh can withstand. Selecting high-quality materials in advance can effectively extend the service life of the product to a certain extent.
Post time: Mar-17-2022