Product Center

OEM High Quality Air Filter Element Supplier – SK-1181AB – Qiangsheng

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Replacement Air Filters, Air Filter Factory, Air Filters Delivered, We always stick to the principle of "Integrity, Efficiency, Innovation and Win-Win business". Welcome to visit our website and do not hesitate to communicate with us. Are you ready? ? ? Let us go!!!
OEM High Quality Air Filter Element Supplier – SK-1181AB – Qiangsheng Detail:

Problems to be paid attention to in the maintenance of diesel engine air filter

The starting devices of rural tractors and agricultural transport vehicles are equipped with air filters, oil filters and diesel filters, commonly known as “three filters”. The operation of “three filters” directly affects the operation function and service life of the starter. At present, quite a lot of drivers fail to maintain and protect the “three filters” according to the prescribed time and rules, resulting in frequent engine failures and premature entry into the maintenance period. Let’s take a look at it next.

The maintenance master reminds you: the protection and maintenance of the air filter, in addition to the regular and operation and maintenance requirements, should also pay attention to the following points:

1. The guide grille of the air filter should not be deformed or rusted, and its inclination angle should be 30-45 degrees. If the resistance is too small, it will increase and affect airflow. If the airflow is too large, the rotation of the airflow will be weakened and the separation from dust will be reduced. The outer surfaces of the blades do not need to be painted to prevent oxidation particles from entering the cylinder.

2. The ventilation mesh should be cleaned during maintenance. If the filter has a dust cup, the dust particle height should not exceed 1/3, otherwise it should be removed in time; the dust cup mouth should be tightly sealed, and the rubber seal should not be damaged or discard.

3. The height of the oil level of the filter should meet the standard requirements. If the oil level is too high, it will cause carbon deposits in the cylinder. Too low oil reduces the filter’s function and accelerates its wear.

4. When the metal mesh (wire) in the filter is replaced, the diameter of the hole or wire can only be slightly smaller, and the filling capacity cannot be increased. Otherwise, the functionality of the filter will be reduced.

5. Pay attention to the air leakage of the intake pipe, and the oil change and cleaning should be carried out in a place without wind and dust; the fan filter should be carried out in an environment with low humidity and high pressure air, and the blowing direction should be opposite to the air entering the filter screen; during installation, The folding directions of adjacent filters of Di should penetrate each other.

Product description

A:

QS NO.  SK-1181A
CROSS  REFERENCE  09205-911210
FLEETGUARD  AF26431
ENGINE  DONGFENG TIANJIN, JINLONG, YUTONG
VEHICLE  360/360-8   K2750  
LARGEST OD  263(MM)
INTRNAL DIAMETER  233/177(MM)
OVERALL HEIGHT  500/ 497(MM)

B:

QS NO.  SK-1181B
CROSS  REFERENCE  09204-311216
FLEETGUARD  AF26432
VEHICLE  REX 485
LARGEST OD  192/160(MM)
INTRNAL DIAMETER  141(MM)
OVERALL HEIGHT  470/ 477(MM)

Our Workshop

workshop
workshop

Packing & Delivery

Packing
Packing

Our Exhibition

workshop

Our service

workshop


Product detail pictures:

OEM High Quality Air Filter Element Supplier –  SK-1181AB – Qiangsheng detail pictures

OEM High Quality Air Filter Element Supplier –  SK-1181AB – Qiangsheng detail pictures

OEM High Quality Air Filter Element Supplier –  SK-1181AB – Qiangsheng detail pictures

OEM High Quality Air Filter Element Supplier –  SK-1181AB – Qiangsheng detail pictures

OEM High Quality Air Filter Element Supplier –  SK-1181AB – Qiangsheng detail pictures

OEM High Quality Air Filter Element Supplier –  SK-1181AB – Qiangsheng detail pictures

OEM High Quality Air Filter Element Supplier –  SK-1181AB – Qiangsheng detail pictures

OEM High Quality Air Filter Element Supplier –  SK-1181AB – Qiangsheng detail pictures


Related Product Guide:

"Control the quality by the details, show the power by quality". Our enterprise has strived to establish a remarkably efficient and stable team team and explored an effective excellent control system for OEM High Quality Air Filter Element Supplier – SK-1181AB – Qiangsheng , The product will supply to all over the world, such as: India, Rwanda, Italy, We'd like to invite customers from abroad to discuss business with us. We can provide our clients with high quality products and excellent service. We are sure that we will have good cooperative relationships and make a brilliant future for both parties.
  • Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
    5 Stars By Jerry from Plymouth - 2017.01.11 17:15
    The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
    5 Stars By Modesty from South Africa - 2017.05.02 18:28
    Write your message here and send it to us