Product Center

Replace Volvo Excavator Filter

Volvo excavator filter element supporting models are available from stock: Volvo oil filter element, Volvo diesel filter element, Volvo air filter element, Volvo hydraulic oil filter element, Volvo oil-water separator filter element and other types of filter elements, ensuring low price, fast supply and quality in the industry comparison excellent.

Care and maintenance of Volvo excavator filter elements:

1. Daily maintenance: check, clean or replace the air filter element; clean the inside of the cooling system; check and tighten the track shoe bolts; check and adjust the back tension of the track; check the excavator air intake heater; replace the bucket teeth; adjust the excavator shovel Bucket clearance; check the front window cleaning fluid level; check and adjust the excavator air conditioner; clean the floor in the cab; replace the crusher filter element (optional).

2. After the new excavator works for 250 hours, the fuel filter element and the additional fuel filter element should be replaced; check the clearance of the excavator engine valve.

3. When cleaning the inside of the cooling system, after the engine is fully cooled, slowly loosen the water injection port cover to release the internal pressure of the water tank, and then water can be discharged; do not clean the engine while the engine is working, the high-speed rotating fan will cause danger; when cleaning or When replacing the coolant, the machine should be parked on a level surface; the coolant and corrosion inhibitor should be replaced according to the table.

Precautions for installing filter elements in Volvo excavators

1. Before installation, check whether the filter element is damaged and whether the O-ring is in good condition.

2. When installing the filter element, keep your hands clean, or wear clean gloves.

3. Before installation, apply Vaseline on the outside of the O-ring to facilitate installation.

4. When installing the filter element, do not remove the packaging plastic bag. Pull the plastic bag backwards. After the upper head is leaked out, hold the lower head of the filter element with the left hand and the filter element body with the right hand, and put the filter element into the filter element seat of the tray. , press down firmly, remove the plastic bag after installation.

Volvo excavator air conditioner filter element should be replaced every 1000 hours or 5 months of operation. If the air filter is clogged, the air intake will be reduced and the cooling/heating capacity will be reduced. Therefore, it should be cleaned or replaced regularly (some brands of air conditioner filters are located at the bottom of the rear of the cab).

Use clean, dry compressed air with a maximum pressure of 5 BAR for compressed air. Do not bring the nozzle closer to 3 – 5 cm. Blow the filter clean from the inside along the pleats.

Volvo Excavator Filter Features:

1. High-quality filter paper, high filtration efficiency and large ash capacity.

2. The number of folds of the filter element meets the service life requirements.

3. The first and last folds of the filter element are connected by clips or special glue.

4. The material of the central tube is excellent, and it is processed into a spiral shape, which is not easy to deform.

5. High-quality filter glue, so that the filter paper and the end cap are well sealed.

Excavator filter elements are generally hydraulic oil filter elements. According to its function and filter material, it can be divided into excavator air filter element, machine filter element, liquid filter element and excavator diesel filter element. The excavator diesel filter is divided into two parts: coarse filter and fine filter. Excavator filter elements are installed to protect internal operating equipment such as excavator chassis, fuel tanks, and engines. The excavator diesel filter element is mainly to protect the engine, and the excavator filter element is generally installed before the engine. The impurities in the oil enter from the outside or are generated from the inside. It needs to be coarsely filtered and then finely filtered by the excavator to effectively filter the impurities in the oil and avoid damage to the engine such as scratches or corrosion. The excavator air filter is to filter out the impurities in the air to avoid the wear of the chassis and the oil cylinder caused by the impurities in the air. No matter what kind of filter element, it should be checked and replaced regularly to ensure the normal operation of the excavator.

The filter element is used to filter liquid or a small amount of solid particles in the air, which can protect the normal operation of the equipment or the cleanliness of the air. When the fluid enters the filter element with a certain size filter screen, its impurities are blocked, and the clean fluid passes through the filter element. outflow. The liquid filter element cleans the contaminated liquid (including oil, water, etc.) to the state required for production and life, that is, to make the liquid reach a certain degree of cleanliness.

Product description

SK-1333AB Construction equipment air filter element for VOLVO 210D excavator 17500251 17500253

A:

B:

Our Workshop

Packing & Delivery

Our Exhibition

Our service